Tool 02

Material takeoff

The quantities to buy, not the area. Mortar and grout are computed from the tile module and the joint, which is where most estimates drift.

Add about 10% to mortar and grout if the substrate is rough, the tile is heavily textured, or the joints are deeper than a third of an inch.

Buy list

40 sq ft

22 tiles · 44 sq ft ordered

Tile

  • Tile pieces

    20 needed for the field, plus 10% for cuts and breakage

    22

    Tile supplier

  • Whole boxes

    15 sq ft per box, 44 sq ft ordered

    3 boxes

    Tile supplier

  • Trim or bullnose

    Exposed edges and outside corners

    26 linear ft

    Tile supplier

Setting & finishing

  • Thinset mortar

    50 lb bags, 1/4" × 3/8" notch, about 60 sq ft per bag

    1 bags

    Big box

  • Grout

    25 lb bags, covers roughly 3 lb at a 0.125" joint

    1 bags

    Big box

  • 100% silicone sealant

    Every change of plane, color matched to the grout

    2 tubes

    Big box

  • Spacers and wedges

    Sized to a 0.125" joint

    1 bags

    Big box

  • Impregnating sealer

    Cementitious grout only, after 72 hours

    1 qt

    Tile supplier

Substrate & waterproofing

  • Backer board

    3 × 5 ft sheets with 10% for cuts

    3 sheets

    Big box

  • Backer screws

    About one per square foot, 1 1/4 inch for 1/2 inch board

    44 screws

    Big box

  • Alkali-resistant mesh tape

    Every seam and inside corner

    1 rolls

    Big box

  • Liquid waterproofing membrane

    Two coats at the data sheet thickness, about 25 sq ft per gallon of the pair

    2 gal

    Tile supplier

  • Sheet membrane

    108 sq ft rolls, plus band and corners

    not selected

    Tile supplier